Connect tool rooms and repair points.Deliver on request and return permitted items.
Deliver standard tool kits, fixtures, spares and consumables from tool rooms to workshops, workstations and repair points, with empty-container returns.
Select items, destination and required time.
Follow configured routes and access rules.
Receive the arrival alert, use configured access and verify receipt.
Where the service helps
Reduce repeated trips around these tasks and define on-site handovers.
Small indoor robot
Frequent short routes within a building.
Large cross-area robot
Larger batches or longer routes, executed independently; staff handle transfers.
Dispatch
Configure scheduled tasks, calls, nearby-task grouping and priorities.
Exclude oversized loads, chemicals and nonstandard moves. The document does not establish ESD certification, millimetre docking or automatic tool inventory.
Service flow and ownership
Robots execute configured tasks; responsible staff retain verification and on-site response.
Select items, destination and required time.
Check items, packaging and compartments; load manually and confirm.
Follow configured routes and access rules.
Receive the arrival alert, use configured access and verify receipt.
Review completion, exceptions and handover records.
Confirm execution separately from human handover/review; assigned staff take over exceptions.
Roles
Dispatch and receiving staff
Request, prepare, load, verify and acknowledge receipt.
Robot
Transport, notify and return status within the configured scope.
Management and support
Maintain points, schedules, equipment, exception handling and records.
Service modes
Select modes for the workflow; agree extensions separately.
Small indoor robot
Frequent short routes within a building.
Large cross-area robot
Larger batches or longer routes, executed independently; staff handle transfers.
Dispatch
Configure scheduled tasks, calls, nearby-task grouping and priorities.
Exclude oversized loads, chemicals and nonstandard moves. The document does not establish ESD certification, millimetre docking or automatic tool inventory.
Scenario fit
Deliver standard tool kits, fixtures, spares and consumables from tool rooms to workshops, workstations and repair points, with empty-container returns.
Small indoor robot
Frequent short routes within a building.
Large cross-area robot
Larger batches or longer routes, executed independently; staff handle transfers.
Dispatch
Configure scheduled tasks, calls, nearby-task grouping and priorities.
Terminals and configuration
Document-based scope; confirm supplied model, options and site fit.
Small robots and TRANGO
Select for routes, dimensions, weight and frequency.
Task management
Requests, priorities, states and receipt records.
Coordination priorities
Assign suitable repeated routes to robots and compare results in the pilot.
Verify outcomes against task, destination and responsible role.
Use task states and exception records to adjust routes, schedules and configuration.
Routes and service points
Configure routes for the actual site; diagrams explain the workflow.
Tool room
Prepare, check and load.
Workshops / repair
Scan, receive and use tools.
Return point
Return empty containers and permitted tools.
Locations
- Tool room
- Workshops / repair
- Return point
Diagrams explain the flow; survey actual passages, thresholds, access and stops.
Site readiness and operations
Confirm site, equipment and staffing; verify interfaces per project.
Handover ownership
Tool-room staff prepare and load; departments verify receipt. Robots do not assess tool quality.
Fallback
Staff coordinate shortages, obstructions and absent recipients to protect maintenance and production.
Commission configured interfaces, notifications and access; assign site contacts and staff fallback.
Document configuration and device checks
| Small robots and TRANGO | Select for routes, dimensions, weight and frequency. |
|---|---|
| Task management | Requests, priorities, states and receipt records. |
Document and current product versions may differ; confirm supplied specifications and project configuration.
Pilot and expansion
Start with tool room to workshop A, then spares to repair points and workshop B. The document’s two-to-four-week validation period is indicative.
Small robots and TRANGO
Select for routes, dimensions, weight and frequency.
Task management
Requests, priorities, states and receipt records.
Suggested sizing assessment
Effective deliveries = completed round trips × actual orders per trip × site adjustment factorUse site data including access, handover, waiting, charging and exceptions; travel speed alone does not establish capacity.
This is an assessment method; source recommendations/targets are not universal performance guarantees.
Sizing considerations
Task cycle
Measure request, execution, handover, return and charging time.
Site scope
Tool room, Workshops / repair, Return point
Staff coordination
Allow for available receiving, reviewing and exception-response staff.
Source configurations/data refer to their stated scenario; confirm final sizing through site validation.
Suggested implementation
The following are project assessment and acceptance suggestions, subject to site confirmation.
Confirm scope
Site preparation
Configure and commission
When ready
Trial and acceptance
By project agreement
Suggested exception handling
The following are project assessment and acceptance suggestions, subject to site confirmation.
| Condition | Action | Ownership and records |
|---|---|---|
| Task cannot continue | Pause, wait or hand over to staff under site rules. | Managers record cause, owner and recovery conditions. |
| Handover/review incomplete | Contact the assigned staff; automatic task closure does not replace their confirmation. | Record the reason and follow-up. |
| Device/access exception | Follow support procedures and use staff service if required. | Support and site staff coordinate and validate recovery. |
Common questions
Where should the pilot start?
Start with tool room to workshop A, then spares to repair points and workshop B. The document’s two-to-four-week validation period is indicative.
How do robots and staff share work?
Dispatch and receiving staff：Request, prepare, load, verify and acknowledge receipt. Robot：Transport, notify and return status within the configured scope. Management and support：Maintain points, schedules, equipment, exception handling and records.
What needs separate confirmation?
Exclude oversized loads, chemicals and nonstandard moves. The document does not establish ESD certification, millimetre docking or automatic tool inventory.
How are configuration and acceptance set?
Use source recommendations as a starting point, then confirm against site routes, supplied equipment and trial data. Suggested checks do not establish fixed performance or service guarantees.
Pilot preparation
Start with tool room to workshop A, then spares to repair points and workshop B. The document’s two-to-four-week validation period is indicative.
| Item | Scope | Confirmation |
|---|---|---|
| Scope and points | Tool room, Workshops / repair, Return point | Confirm accessible scope and responsible staff on site. |
| Routes and access | Maps, passages, doors/lifts, network and charging. | Commission cross-floor and controlled-door access as needed; diagrams do not replace site tests. |
| Handover and exceptions | Dispatch and receiving staff, Robot, Management and support | Agree notifications, staff takeover, records and review rules. |
Scope and points
Tool room, Workshops / repair, Return point Confirm accessible scope and responsible staff on site.
Routes and access
Maps, passages, doors/lifts, network and charging. Commission cross-floor and controlled-door access as needed; diagrams do not replace site tests.
Handover and exceptions
Dispatch and receiving staff, Robot, Management and support Agree notifications, staff takeover, records and review rules.
Related equipment
Review product information and reconcile the document version with the supplied model/configuration.
Related solutions
Choose a dedicated solution for each workflow.
Production-line material and tool delivery
Transport standard materials, tools and empty containers through requests, preparation, loading, delivery, human checks and records.
Explore Solution →Factory sample and quality-inspection transfer
Connect production, receiving, inspection, retesting and retained-sample storage with manual packaging, authorized handovers and task records.
Explore Solution →Factory indoor security patrol
Robots patrol, collect and notify; the platform unifies records and enterprise staff decide and respond.
Explore Solution →