Materials and tools reach the line.Start with a defined replenishment loop.
Transport standard materials, tools and empty containers through requests, preparation, loading, delivery, human checks and records.
Select items, destination and required time.
Follow configured routes and access rules.
Receive the arrival alert, use configured access and verify receipt.
Where the service helps
Reduce repeated trips around these tasks and define on-site handovers.
Short indoor runs
Small robots carry frequent small batches on one floor.
Larger loads
TRANGO handles larger batches, longer routes and cross-area tasks, primarily indoors.
Pilot dispatch
Validate first-come-first-served operation before complex priority insertion.
Select large and small robots for separate tasks; staff transfer loads when a connection is needed. Automatic transfer, hazardous goods and oversized loads are outside this scope.
Service flow and ownership
Robots execute configured tasks; responsible staff retain verification and on-site response.
Select items, destination and required time.
Check items, packaging and compartments; load manually and confirm.
Follow configured routes and access rules.
Receive the arrival alert, use configured access and verify receipt.
Review completion, exceptions and handover records.
Confirm execution separately from human handover/review; assigned staff take over exceptions.
Roles
Dispatch and receiving staff
Request, prepare, load, verify and acknowledge receipt.
Robot
Transport, notify and return status within the configured scope.
Management and support
Maintain points, schedules, equipment, exception handling and records.
Service modes
Select modes for the workflow; agree extensions separately.
Short indoor runs
Small robots carry frequent small batches on one floor.
Larger loads
TRANGO handles larger batches, longer routes and cross-area tasks, primarily indoors.
Pilot dispatch
Validate first-come-first-served operation before complex priority insertion.
Select large and small robots for separate tasks; staff transfer loads when a connection is needed. Automatic transfer, hazardous goods and oversized loads are outside this scope.
Scenario fit
Transport standard materials, tools and empty containers through requests, preparation, loading, delivery, human checks and records.
Short indoor runs
Small robots carry frequent small batches on one floor.
Larger loads
TRANGO handles larger batches, longer routes and cross-area tasks, primarily indoors.
Pilot dispatch
Validate first-come-first-served operation before complex priority insertion.
Terminals and configuration
Document-based scope; confirm supplied model, options and site fit.
Small delivery terminal
Short routes, narrower passages and smaller batches.
TRANGO
Larger loads and cross-area routes, subject to load validation.
Coordination priorities
Assign suitable repeated routes to robots and compare results in the pilot.
Verify outcomes against task, destination and responsible role.
Use task states and exception records to adjust routes, schedules and configuration.
Routes and service points
Configure routes for the actual site; diagrams explain the workflow.
Staging
Check items, quantities, packaging and destination.
Tool room and production line
Manual loading, scan checks and receipt.
Return/support
Empty-container returns, charging and safe standby.
Locations
- Staging
- Tool room and production line
- Return/support
Diagrams explain the flow; survey actual passages, thresholds, access and stops.
Site readiness and operations
Confirm site, equipment and staffing; verify interfaces per project.
Pilot targets, not guarantees
Measure a 40% reduction in handling hours, ≥95% on-time rate, 20–30% less waiting and full record coverage against an agreed baseline.
Exceptions
Staff coordinate obstructions, shortages and missing recipients; retain task states.
Commission configured interfaces, notifications and access; assign site contacts and staff fallback.
Document configuration and device checks
| Small delivery terminal | Short routes, narrower passages and smaller batches. |
|---|---|
| TRANGO | Larger loads and cross-area routes, subject to load validation. |
Document and current product versions may differ; confirm supplied specifications and project configuration.
Pilot and expansion
Document pilot reference: one workshop, staging area and tool room, one or two small robots and one TRANGO, with charging and standby points.
Small delivery terminal
Short routes, narrower passages and smaller batches.
TRANGO
Larger loads and cross-area routes, subject to load validation.
Suggested sizing assessment
Effective deliveries = completed round trips × actual orders per trip × site adjustment factorUse site data including access, handover, waiting, charging and exceptions; travel speed alone does not establish capacity.
This is an assessment method; source recommendations/targets are not universal performance guarantees.
Sizing considerations
Task cycle
Measure request, execution, handover, return and charging time.
Site scope
Staging, Tool room and production line, Return/support
Staff coordination
Allow for available receiving, reviewing and exception-response staff.
Source configurations/data refer to their stated scenario; confirm final sizing through site validation.
Suggested implementation
The following are project assessment and acceptance suggestions, subject to site confirmation.
Confirm scope
Site preparation
Configure and commission
When ready
Trial and acceptance
By project agreement
Suggested exception handling
The following are project assessment and acceptance suggestions, subject to site confirmation.
| Condition | Action | Ownership and records |
|---|---|---|
| Task cannot continue | Pause, wait or hand over to staff under site rules. | Managers record cause, owner and recovery conditions. |
| Handover/review incomplete | Contact the assigned staff; automatic task closure does not replace their confirmation. | Record the reason and follow-up. |
| Device/access exception | Follow support procedures and use staff service if required. | Support and site staff coordinate and validate recovery. |
Common questions
Where should the pilot start?
Document pilot reference: one workshop, staging area and tool room, one or two small robots and one TRANGO, with charging and standby points.
How do robots and staff share work?
Dispatch and receiving staff：Request, prepare, load, verify and acknowledge receipt. Robot：Transport, notify and return status within the configured scope. Management and support：Maintain points, schedules, equipment, exception handling and records.
What needs separate confirmation?
Select large and small robots for separate tasks; staff transfer loads when a connection is needed. Automatic transfer, hazardous goods and oversized loads are outside this scope.
How are configuration and acceptance set?
Use source recommendations as a starting point, then confirm against site routes, supplied equipment and trial data. Suggested checks do not establish fixed performance or service guarantees.
Pilot preparation
Document pilot reference: one workshop, staging area and tool room, one or two small robots and one TRANGO, with charging and standby points.
| Item | Scope | Confirmation |
|---|---|---|
| Scope and points | Staging, Tool room and production line, Return/support | Confirm accessible scope and responsible staff on site. |
| Routes and access | Maps, passages, doors/lifts, network and charging. | Commission cross-floor and controlled-door access as needed; diagrams do not replace site tests. |
| Handover and exceptions | Dispatch and receiving staff, Robot, Management and support | Agree notifications, staff takeover, records and review rules. |
Scope and points
Staging, Tool room and production line, Return/support Confirm accessible scope and responsible staff on site.
Routes and access
Maps, passages, doors/lifts, network and charging. Commission cross-floor and controlled-door access as needed; diagrams do not replace site tests.
Handover and exceptions
Dispatch and receiving staff, Robot, Management and support Agree notifications, staff takeover, records and review rules.
Related equipment
Review product information and reconcile the document version with the supplied model/configuration.
Related solutions
Choose a dedicated solution for each workflow.
Factory air and odor patrol solution
Collect air readings along workshop, storage and shared-corridor routes, revisit anomalies and let staff review and respond.
Explore Solution →Factory sample and quality-inspection transfer
Connect production, receiving, inspection, retesting and retained-sample storage with manual packaging, authorized handovers and task records.
Explore Solution →Factory indoor security patrol
Robots patrol, collect and notify; the platform unifies records and enterprise staff decide and respond.
Explore Solution →